Backsight Foresight
Backsight Foresight - Related Videos
01:12
Hindsight Biases
0 Views •
2020
Hindsight bias leads you to believe that the event you just experienced was predictable, even though it really wasn’t. In other words, you knew all along that things would turn out the way they did. Can you relate this to the phrase "Hindsight is 20/20" now? This text is adapted from OpenStax, Psychology. OpenStax CNX.
08:40
Determination of S-Phase Duration Using 5-Ethynyl-2'-deoxyuridine Incorporation in Saccharomyces cerevisiae
0 Views •
2022
We describe two complementary protocols to accurately determine S-phase duration in S. cerevisiae using EdU, a thymidine analog, which is incorporated in vivo and detected using Click chemistry by microscopy and flow cytometry. It allows for the easy characterization of the duration of DNA replication and overlooked replication defects in mutants.
FAQs
A known elevation supplies the reference needed to establish the instrument height for that setup. Once that height is available, a reading on another point can be converted into an elevation by subtraction. This connection to an established benchmark lets the survey extend vertical control beyond the original reference point.
Closing measurements provide a check on the elevations transferred along the route. After the sequence reaches a closing point, the measured result can be compared with that point’s established elevation or the expected closure. This check helps determine whether the completed leveling run provides sufficiently reliable vertical control for engineering work.
Their value comes from the relationship between the reference reading and the subsequent reading. The backsight establishes the height from which the calculation begins, while the foresight determines how that height translates to the next point’s elevation. Treating them as a sequence preserves the elevation relationship as control moves along a route.
To extend elevations, begin at a benchmark or other point of known elevation. Take the backsight, calculate the instrument height, and then take the foresight on the next point. Repeat this calculation and reading sequence from point to point along the route, using closing measurements to check the transferred control.
In engineering, these readings support construction layout by supplying elevations that can guide work at a site. The same vertical control informs grading and drainage design, where relative ground levels matter, and road alignment, where elevation must be carried along a route. Their shared basis is transferred elevation control.
For settlement monitoring, repeated leveling measurements can be compared with earlier elevations to identify changes in ground level. Backsight and foresight sequences provide a consistent way to transfer those elevations from established control points to locations being observed. Closing checks strengthen interpretation by showing whether the measurement run maintains the expected vertical relationship.