Vacuum Loading Technique
Vacuum Loading Technique - Related Videos
09:41
Magnet Assisted Composite Manufacturing: A Flexible New Technique for Achieving High Consolidation Pressure in Vacuum Bag/Lay-Up Processes
0 Views •
Cited by 5 •
2018
A new technique for applying consolidation pressure on the vacuum bag lay-up to fabricate composite laminates is described. The goal of this protocol is to develop a simple, cost-effective technique to improve the quality of laminates fabricated by the wet lay-up vacuum bag method.
02:44
Endovascular Treatment of Acute Ischemic Stroke Using the Stent Retriever-Assisted Vacuum-Locked Extraction Technique
0 Views •
2025
Source: Schregel, K., et al. Optimized Management of Endovascular Treatment for Acute Ischemic Stroke. J. Vis. Exp. (2018).This video demonstrates the endovascular treatment of acute ischemic stroke using the stent retriever-assisted vacuum-locked extraction technique. A guiding sheath is introduced through the femoral artery to reach the clot. A catheter with a stent retriever secures and extracts the clot. Vascular imaging is done to confirm successful reperfusion.
06:20
Proper Operation of Vacuum Based Equipment
0 Views •
2023
Source: Robert M. Rioux, Ajay Sathe & Zhifeng Chen, Pennsylvania State University, University Park, PA Vacuum is required for a number of laboratory procedures. This is most routinely achieved in the laboratory by the use of vacuum pumps. In addition to working at low pressures, vacuum pumps can also be used to enable rapid changing of the atmospheres in a reactor or flask by evacuation and backfilling.
07:49
Development of an Experimental Setup for the Measurement of the Coefficient of Restitution under Vacuum Conditions
0 Views •
Cited by 11 •
2016
The coefficient of restitution is a parameter that describes the loss of kinetic energy during collision. Here, a free-fall setup under vacuum conditions is developed to be able to determine the coefficient of restitution parameter for particles in micrometer range with high impact velocities.
02:59
Bead Loading to Introduce Nucleic Acids Into Adherent Cultured Cells: A Technique to Load Fluorescent Protein-Encoding Plasmids Into Adherent Mammalian Cells
0 Views •
2025
In this video, we describe the procedure to introduce nucleic acids into adherent mammalian cells using bead loading.
FAQs
Vacuum loading technique works by controlling pressure in and around a porous construct. Reduced pressure encourages air trapped within the pores to leave; when atmospheric pressure is restored, the pressure difference pushes the surrounding liquid, cell suspension, or biomaterial-containing solution into those spaces. This sequence improves internal distribution because loading is driven into the pore network rather than relying only on surface contact.
Trapped air occupies pore volume and can prevent a suspension or solution from reaching internal regions. Evacuating that air makes the available spaces receptive to the surrounding material, while pressure restoration supplies the force for entry. The result can be more uniform impregnation or seeding throughout the structure, improving consistency compared with passive soaking alone.
The porous material provides the internal spaces that receive the introduced liquid, cells, biomaterial, or bioactive compound. Its pores first contain air that can be removed under reduced pressure, then accept the surrounding material when atmospheric pressure returns. This relationship between pore space and pressure change enables loading within the construct rather than limiting material placement to external surfaces.
A typical workflow places the porous structure in contact with the selected liquid, cell suspension, or biomaterial-containing solution, then applies reduced pressure to remove air from the pores. After evacuation, atmospheric pressure is restored so the surrounding material moves into the available spaces. The resulting construct contains the introduced material within its internal pore network.
The technique can introduce liquids, cells, and biomaterials into porous structures. It can also support delivery of bioactive compounds when they are provided in a suitable surrounding solution or material. This flexibility makes the approach relevant to scaffold impregnation, cell seeding, and preparation of tissue-engineering constructs, where internal distribution affects the consistency and function of the final construct.
Researchers can use this method when a porous scaffold or other biomaterial must receive material throughout its internal structure rather than primarily at its surface. Applications include scaffold impregnation, cell seeding, and delivery of bioactive compounds for tissue-engineering constructs. By improving loading uniformity compared with passive soaking alone, the approach can support more consistent fabrication of engineered tissues and related porous biomaterials.