Name: virtual work for finding unknown forces
Uploaded: 2023-09-22T11:49:20.000Z
Duration: 1 min 13 s
Channel: JoVE

Consider a scissors linkage system connected to a spring, which is unstretched at a certain angle.
In the presence of an external force, the spring stretches and the system undergoes a virtual displacement. In this condition, only the spring force and the external force contribute to work.
To determine the deflection angle to maintain the system&#39;s equilibrium, the position coordinates of the two forces with respect to a fixed point are determined.
Then, the amount by which the spring is compressed and the corresponding spring force are evaluated.
Differentiating position coordinates gives the virtual displacements corresponding to the two forces.
The external force acts in the direction of virtual displacement, so it does positive work. Meanwhile, the spring force acts opposite to the virtual displacement and does negative work.
Next, the principle of virtual work is used to write down the virtual-work equation for the system.
Solving the virtual-work equation for the given force, the angle needed to maintain the equilibrium of the scissors linkage system can be obtained.

principle of virtual work: problem solving

Principle of Virtual Work: Problem Solving

The principle of virtual work is an essential concept in the field of mechanics and engineering. This is used to solve problems related to the equilibrium of a structure or system. It is based on the assumption that if a system is in equilibrium, the work done by all the forces during a virtual displacement is zero. This principle is applied by considering virtual displacements of the system and the corresponding work done by internal and external forces.
To apply the principle of virtual work, it is necessary to express the position coordinates of the internal and external forces in terms of a common coordinate parameter. This parameter is typically an angle, distance, or displacement that is relevant to the problem at hand.
Once the coordinates have been expressed, the virtual displacements corresponding to each of the forces are found by differentiating the coordinate expressions. The virtual displacements represent hypothetical displacements that the system could undergo, and they allow us to calculate the virtual work done by each force acting on the system.
The external force acting on the system does positive work when it is moving in the direction of its virtual displacement, while the internal forces do negative work when they are opposing their virtual displacements.
To solve a problem using the principle of virtual work, first, identify the unknown forces and moments that exist within the system. Then evaluate the work done by these forces and moments during a hypothetical virtual displacement of the system. The virtual displacement is very small and represents a hypothetical displacement that the system undergoes. This allows the determination of each force and moment acting on the system and the work done by them during this virtual displacement.
Next, write down the virtual-work equation for the system using the principle of virtual work. This equation considers the virtual displacements and corresponding work done by each force and moment acting on the system. Finally, solving the virtual work equation gives the values of the unknown forces and moments in the system.
The principle of virtual work is beneficial for solving problems related to complex systems involving many interconnected parts. It is widely used in engineering and mechanics to calculate a structure or system&#39;s unknown forces and moments.

The principle of virtual work is an essential concept in the field of mechanics and engineering. This is used to solve problems related to the equilibrium ...

principle-of-virtual-work-problem-solving

Education

JoVE Core

Mechanical Engineering

Unit 1

Virtual Work

KEY TERMS AND CONCEPTS

virtual work for finding unknown forces

The principle of virtual work helps find unknown forces and moments in equilibrium problems. It is an important idea in mechanics and engineering. The method uses a small, hypothetical motion called a virtual displacement. If the system is in equilibrium, the work done by the forces during that displacement is zero.

To apply this principle, the positions of the internal and external forces must be written in terms of one common coordinate parameter. That parameter can be an angle, a distance, or another displacement that fits the problem. After the coordinates are written this way, the virtual displacements are found by differentiating the coordinate expressions. These displacements are hypothetical, but they show how the system could move.

Virtual work is then found from the forces acting on the system. An external force does positive work when it moves in the same direction as its virtual displacement. Internal forces do negative work when they oppose their virtual displacements. This sign difference is part of the virtual-work equation.

To solve a problem, first identify the unknown forces and moments in the system. Next, evaluate the work done during a virtual displacement. Then write the virtual-work equation for the whole system. Solving that equation gives the values of the unknown forces and moments. This approach is useful for complex systems with many connected parts.

Virtual Work for Finding Unknown Forces

work

Work in Force and Motion

Work connects force, motion, and energy in mechanics. It happens when a force acts on an object and the object moves along the line of action of that force. Work can also be described as energy transfer caused by applying a force, which leads to a change in the object’s motion or position. Work is calculated as the force multiplied by the part of the displacement in the same direction as the force. It can also be written as the dot product of the applied force and the object’s displacement. In...

work of a couple moment

Couple Moment Work in Rotation

Mechanical engineering studies motion, energy, and force, and it uses the idea of a couple moment to describe how two equal and opposite forces act on a rigid body. A couple moment is created when those forces act at two points on the body that are separated by a distance. When a rigid body moves because of a couple, its displacement can be split into two parts. First, the two points move by the same amount to their final positions. Then the body rotates about one of those points. During the...

virtual work

Virtual Work in Force Equilibrium

Virtual work is a mechanics principle used to check equilibrium with imaginary motion. If a body is in static or dynamic equilibrium, the total virtual work from external forces and couple moments must be zero for any virtual displacement. A virtual displacement is an imagined small movement. It can be a shift or a rotation. The virtual work done by a force equals the force dotted with the virtual displacement in the force’s direction. For a couple moment, virtual rotational work is found by...

virtual work for a system of connected rigid bodies

virtual-work-for-a-system-of-connected-rigid-bodies

Finding Forces with Virtual Work in Linked Bodies

Virtual work helps find forces in a system of connected rigid bodies. It is a useful method when several links move together and the system is in equilibrium. In that case, the total virtual work is zero. To analyze the system, start with a free-body diagram. Use one independent coordinate to describe the link configuration. Then mark the deflected position that comes from a positive virtual displacement. This makes the small change in position clear before any calculations begin. Next,...

The principle of virtual work helps find unknown forces and moments in equilibrium problems. It is an important idea in mechanics and engineering. The method uses a small, hypothetical motion called a virtual displacement. If the system is in equilibrium, the work done by the forces during that displacement is zero. To apply this principle, the positions of the internal and external forces must be written in terms of one common coordinate parameter. That parameter can be an angle, a distance,...

mechanical efficiency of real machines

Friction’s Role in Machine Efficiency

Mechanical efficiency shows how well a machine turns input work into output work. It is calculated as the ratio of output work to input work. An ideal machine has an efficiency of one, which means the input work equals the output work. Real machines are never perfectly ideal because some energy is lost. Friction is one of the main causes of that loss. In a toggle vise used to compress wooden blocks, the sliding block rubs against the horizontal plane and creates friction. To find the...

conservative forces

Conservative Forces and Path-Independent Work

Conservative forces are forces whose work depends only on an object’s starting and ending positions. The path between those positions does not change the amount of work done. This idea is important in mechanical engineering because it helps describe how energy moves through a system. A conservative force also conserves energy in the sense that its work is path independent. Gravity is one example. Electrostatic forces and springs modeled by Hooke’s law are also examples. A ball rolling down a...

potential energy

Gravitational and Elastic Energy Stored

Gravitational and elastic potential energy are forms of stored energy from conservative forces. A conservative force, such as gravity or an elastic force, gives a body the capacity to do work. This capacity is measured as potential energy and depends on the body’s position relative to a fixed reference point, or datum. For gravitational potential energy, the datum is the level where the energy is taken as zero. If a body is above this reference plane, its weight has positive gravitational...

potential-energy criterion for equilibrium

potential-energy-criterion-for-equilibrium

Stable Equilibrium Through Potential Energy

Potential energy helps determine when a mechanical system is stable at equilibrium. When a system is acted on by gravitational and elastic forces, its total potential function is the algebraic sum of gravitational potential energy and elastic potential energy. If the system is already in equilibrium and is given a small displacement, the work done on the system equals the negative of the change in potential energy between the starting and ending positions. For a virtual displacement, which is...

stability of equilibrium configuration

Types of Equilibrium in Mechanical Systems

Types of equilibrium in mechanical systems are stable, neutral, and unstable. These three cases help explain how a structure or object responds when it is pushed slightly away from balance. They are important for predicting whether a system will return to its original position, stay where it is, or move farther away. Stable equilibrium occurs when a system returns toward its original position after a small displacement. In this case, the potential energy is at a minimum. A cantilever beam...

one-degree-of-freedom system

Spring-Mass Motion and Energy Stability

A one-degree-of-freedom system uses a single independent variable to describe its state and behavior. In mechanical engineering, this kind of model helps explain how parts in a larger system respond to force. It also gives engineers a way to predict motion before a design is built in real life. A simple harmonic oscillator is one example of a one-degree-of-freedom system. A mass attached to a spring moves along one axis, and that position determines the system’s state. The spring force makes...

stability of equilibrium configuration: problem solving

stability-of-equilibrium-configuration-problem-solving

Equilibrium Stability Through Potential Energy

Stability of equilibrium in physics and engineering can be studied by using a system’s potential energy. An equilibrium configuration is a state where the system can remain at rest. Stability describes whether the system tends to return to that state after a small disturbance. Problem solving begins by finding the equilibrium points of the system. This is done by setting the derivative of the potential energy function equal to zero and solving for the independent variable values that satisfy...

key terms and concepts

Learn how the principle of virtual work uses a small virtual displacement to find unknown forces and moments in equilibrium problems with connected systems.

Virtual Work for Finding Unknown Forces | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Virtual Work for Finding Unknown Forces

Description

Transcript

Tags