Sharp-crested Weir
Sharp-crested Weir - Related Videos
01:24
Weir
0 Views •
2025
A weir is a hydraulic structure designed to partially obstruct an open channel, enabling precise control and measurement of water flow. By forcing water to flow over or through it, a weir allows for accurate determination of discharge rates, making it an essential tool in water resource management. These structures are extensively used in regulating river flows, irrigation systems, and flood control channels.Types of Weirs and Their FeaturesWeirs are categorized primarily into sharp-crested and...
07:15
Parameterizing V-notch Weir Equations for Flow Monitoring in a Drainage Control Structure
0 Views •
2025
This protocol describes methods for obtaining weir flow equation coefficients for a V-notch weir within a drainage control structure using (1) a laboratory calibration procedure and (2) an online tool, the "Weir Flow Equation Coefficients Calculator", developed by the authors. These methods apply to flows contained within the V-notch and overtopping flows.
01:26
Weir: Problem Solving
0 Views •
2025
Water flow in open channels is often measured using hydraulic structures such as weirs, which allow precise calculation of discharge. In a rectangular channel, flow rates are measured using three types of weirs: rectangular sharp-crested, triangular sharp-crested, and broad-crested. The weir head is set at a fixed height above the channel bottom, simplifying calculations and enabling the relationship between depth and flow rate to be analyzed.For the rectangular sharp-crested weir, the flow...
05:30
Making Patch-pipettes and Sharp Electrodes with a Programmable Puller
0 Views •
Cited by 22 •
2008
This video shows how to use a programmable puller to make patch pipettes and sharp electrodes for electrophysiology. The same procedure can be used to make a variety of glass tools, including injection needles.
05:34
5/6 Nephrectomy Using Sharp Bipolectomy Via Midline Laparotomy in Rats
0 Views •
2025
This manuscript introduces a standardized protocol for a 5/6 nephrectomy by sharp bipolectomy via midline laparotomy in a rat model, aiming to induce a state of renal insufficiency via renal parenchyma reduction with a great degree of methodical precision and low risk of technical error.
FAQs
The upstream head provides the principal hydraulic input for the head-discharge relationship, while crest geometry defines the passage over which water flows. Flow conditions also affect how accurately that relationship represents the actual discharge. Engineers therefore consider head, geometry, and conditions together rather than relying on a single reading, improving flow estimates in channels and tanks.
At the sharp edge, water separates from the crest and develops a free-falling nappe. This separation produces recognizable flow behavior that links the measured upstream head to discharge. Observing the nappe also helps students connect visible water motion with hydraulic calculations, including the energy changes that occur as water moves through an open-channel system.
Sharp-crested weirs serve two related engineering functions. For measurement, engineers use the relationship between upstream head and discharge to estimate flow. For control, the crest forces water through a defined passage and influences its movement in the channel. The same structure therefore supports quantitative monitoring and practical management of water movement.
An engineering evaluation begins by establishing flow over the crest and identifying the crest geometry. The upstream water head is then determined under the relevant flow conditions, and these inputs are used in a head-discharge calculation. In laboratory work, this process lets investigators compare observed hydraulic behavior with the expected relationship and evaluate measurement performance.
They make fundamental open-channel behavior visible and measurable. By examining the relationship between upstream head and discharge, students can connect hydraulic observations with calculations and discuss energy changes in the system. Laboratory use also provides a basis for calibrating instruments and evaluating hydraulic performance, linking classroom demonstrations with practical engineering measurement.
In water-management systems, sharp-crested weirs are useful when engineers need a predictable head-discharge relationship for practical flow assessment. Applications include channels and tanks, where crest geometry and upstream head support discharge estimation. The approach also contributes to instrument calibration, hydraulic performance evaluation, and analysis of energy changes in open-channel systems.