Flim Acquisition
Flim Acquisition - Related Videos
07:58
Electroplating of Thin Films
0 Views •
2023
Source: Logan G. Kiefer, Andrew R. Falkowski, and Taylor D. Sparks, Department of Materials Science and Engineering, The University of Utah, Salt Lake City, UT Electroplating is a process that uses electric current to reduce dissolved metal cations so that they form a thin coating on an electrode. Other thin film deposition techniques include chemical vapor deposition (CVD), spin coating, dip coating, and sputter deposition among others. CVD uses a gas-phase precursor of the element to be...
10:08
Fabrication of Large-area Free-standing Ultrathin Polymer Films
0 Views •
Cited by 10 •
2015
We describe a method for the fabrication of large-area (up to 13 cm diameter) and ultrathin (as thin as 8 nm) polymer films. Instead of using a sacrificial interlayer to delaminate the film from its substrate, we use a self-limiting surface treatment suitable for arbitrarily large areas.
02:51
Light Acquisition
0 Views •
2026
In order to produce glucose, plants need to capture sufficient light energy. Many modern plants have evolved leaves specialized for light acquisition. Leaves can be only millimeters in width or tens of meters wide, depending on the environment. Due to competition for sunlight, evolution has driven the development of increasingly larger leaves and taller plants, to avoid shading by their neighbors, along with the elaboration of root architecture and mechanisms to transport water and...
09:32
Cooling Rate Dependent Ellipsometry Measurements to Determine the Dynamics of Thin Glassy Films
0 Views •
Cited by 2 •
2016
Here, we present a protocol for cooling rate dependent ellipsometry experiments, which can determine the glass transition temperature (Tg), average dynamics, fragility and the expansion coefficient of the super-cooled liquid and glass for a variety of glassy materials.
01:28
Acquisition of Stock and Assets
0 Views •
2025
Acquiring stock or assets is a critical strategy for business expansion, enabling organizations to strengthen their competitive position, diversify operations, or enter new markets. This process is tailored to the specific objectives of the acquiring company, with stock, asset, and mixed acquisitions offering distinct advantages and challenges. Stock acquisitions involve purchasing a target company's equity, granting the acquirer control over its operations, assets, and liabilities. This...
FAQs
Time-correlated single-photon counting links each detected fluorescence photon to the timing of the excitation pulse. The detector records photon arrival times, and the resulting timing distribution is used to calculate fluorescence lifetimes. This approach provides temporal information for each measurement location, allowing researchers to compare how fluorophores behave in different molecular or cellular environments.
Fluorescence intensity depends strongly on factors such as probe concentration and excitation intensity, whereas lifetime measurements are less dependent on those variables. Consequently, FLIM acquisition can reveal changes in a fluorophore’s molecular environment even when brightness differences are difficult to interpret. This supports more quantitative comparisons across complex samples and living neural tissue.
A fluorophore’s lifetime can change when its surrounding molecular environment changes. Ion-sensitive and voltage-sensitive indicators use this relationship to report cellular conditions through lifetime differences rather than brightness alone. In neural samples, the measured signal can therefore reflect local biochemical or electrical states, helping distinguish environmental changes within neurons and neural circuits.
Conventional fluorescence imaging primarily compares how much light a labeled structure emits. FLIM acquisition adds the time fluorophores remain excited before emission, producing a measurement that is less dependent on probe concentration and excitation intensity. This distinction is important when brightness alone cannot separate molecular environments, biochemical interactions, or cellular states in a complex specimen.
A typical workflow places fluorescently labeled molecules or structures in the imaging system, excites them with a pulsed light source, and detects emitted photons. The system records photon arrival times relative to excitation, then analyzes those timing data to calculate lifetimes. Researchers can use the resulting measurements to map differences across cells, tissue, or neural circuits.
The essential components are a pulsed excitation source and detectors capable of recording the arrival times of emitted photons. Timing electronics or related measurement methods convert those arrivals into lifetime information, commonly through time-correlated single-photon counting. The resulting data describe fluorescence decay timing rather than only total emission, enabling spatial comparisons of labeled structures.
In neuroscience, FLIM acquisition is useful for mapping molecular environments, monitoring ion-sensitive or voltage-sensitive indicators, and distinguishing biochemical interactions. These applications extend from individual neurons to neural circuits and living tissue. Because lifetime is comparatively less affected by probe concentration and excitation intensity, the method can support quantitative measurements where variable labeling or illumination complicates intensity-based interpretation.