Micro Channel Plate Detector
Micro Channel Plate Detector - Related Videos
06:05
Additive Manufacturing-Enabled Low-Cost Particle Detector
0 Views •
Cited by 1 •
2023
Here, we present a protocol on how to build and test a simple but efficient low-cost particle detector.
09:35
Distinctive Capillary Action by Micro-channels in Bone-like Templates can Enhance Recruitment of Cells for Restoration of Large Bony Defect
0 Views •
Cited by 5 •
2015
A step-by-step generic process to create a bone-like template with engineered micro-channels is presented. High absorption and retention capabilities of the template are demonstrated by capillary action via micro-channels.
08:43
Pneumatically Driven Microfluidic Platform for Micro-Particle Concentration
0 Views •
Cited by 3 •
2022
The present protocol describes a pneumatic microfluidic platform that can be used for efficient microparticle concentration.
16:00
Fabrication of the Thermoplastic Microfluidic Channels
0 Views •
2008
Here we demonstrate how to fabricate thermoplastic microfluidic chips using hot embossing and heat sealing. Then we demonstrate how to use in situ light directed surface grafting and polymerization through the sealed chip to form the composite solid phase columns.
01:13
Gas Chromatography: Overview of Detectors
0 Views •
2025
Detectors in gas chromatography (GC) help identify and quantify the components of a mixture by translating chemical properties into measurable signals, which are displayed on a chromatogram. Detectors can be categorized into two main types: destructive and non-destructive. A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
FAQs
The applied voltage accelerates an electron through a microscopic channel. As the electron moves, it triggers secondary-electron emission, and those new electrons are accelerated in turn. Repeating this process creates a cascade rather than a single-electron response, allowing a weak incoming event to produce a measurable electrical pulse for detection.
The resistive coating forms an essential part of the channel surfaces where the electron cascade develops. Incoming radiation can release an electron, and the channel environment supports repeated secondary-electron emission as that electron travels under the applied voltage. This internal multiplication is what converts a small initial event into a detectable output.
Fast timing allows the detector to associate a signal closely with the arrival of a particle or photon, which is important when measurements depend on event timing. Its microscopic, parallel-channel structure also supports high spatial resolution, helping distinguish where signals occur. Together, these properties make the device useful for resolving weak events in physics experiments.
The detector can respond to charged particles, photons, and other radiation when an incoming event releases an electron that initiates amplification. This broad response supports particle detection as well as ultraviolet and X-ray measurements. Its sensitivity is particularly valuable when the radiation produces weak signals that require internal amplification before readout.
In time-of-flight measurements, the detector's fast timing helps record when an amplified signal arrives, supporting measurements based on particle arrival times. Mass spectrometry is another application in which detecting weak particle-related signals is important. The resulting measurable pulses provide the detector output needed for these timing-sensitive experimental systems.
Within an image intensifier, the detector supplies sensitive amplification for weak signals so that otherwise difficult-to-measure radiation can produce a stronger measurable response. Its high spatial resolution is also relevant when preserving information about where signals occur. This combination makes the technology useful for imaging applications involving ultraviolet or X-ray radiation.