Rapid Injection Method
Rapid Injection Method - Related Videos
06:24
A Novel Cell Injection Method with Minimum Invasion
0 Views •
2023
This method eliminates any major invasion during cell injections caused by the cell suspension solution.
10:43
Rapid and Low-cost Prototyping of Medical Devices Using 3D Printed Molds for Liquid Injection Molding
0 Views •
Cited by 34 •
2014
We have devised a method for low-cost and rapid prototyping of liquid elastomer rubber injection molded devices by using fused deposition modeling 3D printers for mold design and a modified desiccator as a liquid injection system.
07:51
High Throughput Microfluidic Rapid and Low Cost Prototyping Packaging Methods
0 Views •
2013
In this article we describe different techniques for microfluidic rapid prototyping platforms. The proposed techniques are based on ultraviolet (UV) sensitive and temperature curing epoxies, polydimethylsiloxane (PDMS) based tubing, wire-bonding, and anisotropic adhesive films. The assembling procedures presented are developed for both one-time use devices as well as reusable microfluidic systems.
09:10
DetectSyn: A Rapid, Unbiased Fluorescent Method to Detect Changes in Synapse Density
0 Views •
Cited by 1 •
2022
DetectSyn is an unbiased, rapid fluorescent assay that measures changes in relative synapse (pre- and postsynaptic engagement) number across treatments or disease states. This technique utilizes a proximity ligation technique that can be used both in cultured neurons and fixed tissue.
06:18
An Improved Method for Accurate and Rapid Measurement of Flight Performance in Drosophila
0 Views •
Cited by 46 •
2014
Here we describe a method for rapid and accurate measurement of flight performance in Drosophila, enabling high-throughput screening.
FAQs
Pressure-driven flow supplies the force that moves a selected liquid through a syringe, nozzle, or channel and into a defined region. The delivery path helps determine where the material accumulates and supports formation of a controlled geometry. Consistent movement through the chosen pathway can also contribute to reproducible fabrication of engineered structures.
These processes stabilize the injected material after it reaches the desired space or mold. Cooling can solidify the material, while gelation or chemical crosslinking can create a more persistent structure within a biological construct. Selecting an appropriate stabilization process helps preserve the intended geometry and determines whether the resulting product is a device, hydrogel, scaffold, or related construct.
Geometric control allows the material to occupy a defined space rather than forming an uncontrolled shape. This is important when fabricating polymeric devices, hydrogels, scaffolds, or other engineered biological systems whose structure affects how they are prepared and studied. Combining directed injection with post-injection stabilization can improve reproducibility between fabricated constructs.
A typical workflow begins by selecting the liquid material and the target space, mold, or biological construct. The material is then driven through a syringe, nozzle, or channel into the defined geometry. After placement, cooling, gelation, or chemical crosslinking stabilizes the structure. The resulting construct can then support fabrication, prototyping, or biomaterials research.
The method requires a liquid material selected for the intended engineered system, along with a syringe, nozzle, or channel for pressure-driven delivery. A defined space, mold, or biological construct receives the material, and a suitable stabilization process follows. These components support work with polymeric devices, hydrogels, scaffolds, and other bioengineered structures.
Researchers can apply this approach when they need rapid, controlled preparation of customized structures. Its uses include prototyping, tissue engineering, biomaterials research, and development of tailored biofabrication workflows. The method is also relevant when shortened fabrication time and improved reproducibility are valuable outcomes, particularly for preparing devices, hydrogels, scaffolds, or other engineered biological systems.